Dear all Flashforge users, the upgrade has been done and the FlashCloud has been available for use now. Thanks for your support. 

L C D
RESIN
LCD Standard Photopolymer Resin
Excellent performance in detail, low shrinkage, Low odor, use more safety. Easy clean and painting, good long-term storage stability. Compatible with most LCD 3D printers, widely used in prototype, garage kit.
Grey
White
Transparent
Green
Red
Black
Density (g/ml)
1.05 ~ 1.15
Viscosity (cps, 25℃)
250 ~ 350
Hardness (D)
85 D
Tensile Strength (MPa)
48 Mpa
Elongation @ break (%)
10%
Flexural Modulus (MPa)
2250 Mpa
Flexural Strength (MPa)
86 Mpa
LCD ABS-like Photopolymer Resin
Good mechanical strength & rigid-tough balance, low shrinkage. Low odor, use more safety. Easy clean and painting, good long-term storage stability. Compatible with most LCD 3D printers. Widely used in prototype, garage kit & (partial) industrial applications.
Grey
Density (g/ml)
1.05 ~ 1.15
Viscosity (cps, 25℃)
300 ~ 400
Hardness (D)
82 D
Tensile Strength (MPa)
37 Mpa
Elongation @ break (%)
11%
Flexural Modulus (MPa)
2100 Mpa
Flexural Strength (MPa)
71 Mpa
LCD Washable Photopolymer Resin
Good mechanical strength & rigid-tough balance, low shrinkage. Excellent performance in detail. Low odor, easy clean (just using water) use more eco-friendly and safety. Good heat-resistance with no crack or deformation (30 min at 100 ). Easy painting, good long-term storage stability. Compatible with most LCD 3D printers.
Grey
White
Beige
Density (g/ml)
1.13 ~ 1.24
Viscosity (cps, 25℃)
160 ~ 220
Hardness (D)
84 D
Tensile Strength (MPa)
32 Mpa
Elongation @ break (%)
8%
Flexural Modulus (MPa)
2200 Mpa
Flexural Strength (MPa)
58 Mpa
Get A Quote
Need more information?
we will response within 24 hours

Message has been sent