Dear all Flashforge users, the upgrade has been done and the FlashCloud has been available for use now. Thanks for your support. 

Equipped with the specialized cloud platform which supports remote management on multiple devices, our innovative Flashforge AD1 for 3d letters is able to enhance productivity and reduce manpower; moreover, with our Flashforge AD1, more choices of fonts and colours are available, and signs and letters can be put into mass production without giving off any dust or exhaust fumes.
Segmented heating parts
The segmented heating mode allows the four divided parts to be heated independently, saving unnecessary power consumption. It takes only 2 minutes for each part to be heated to 100℃.
Fast & Efficient printing
Having 10-88mm/s printing speed and being able to conduct full-size printing, the Flashforge AD1 allows up to twenty 100mm flanges to be printed simultaneously.
Resume printing from power failure
In case of unexpected power failure, the extruder will immediately rise using stored electricity to prevent the high temperature of nozzle from damaging the printed letters. The printing can be resumed once the power restores to save printing time.
Filaments detection
The printing will automatically pause when the filaments run out; it will continue when new filaments are reloaded.
Dual-colour printing
Flashforge AD1 allows flanges to be printed in multiple colours.
How to make 3D printed channel letter?
( For example: the procession of 3D printed neon light letter )
Get a Vector file by using CDR
Load the files into FlashAD to generate a 3D printing file and a cutting file
Note: FlashAD support .stl, .cdr, .nc and .dxf file format
Send the 3D printing file to AD1 and start to build
Paste light bar
Produce letter panel (It makes)
Assemble parts
For convenient production and management, several AD1 printers can be operated via Flash AD as long as the device is connected to wired network. After the files are set and transferred to the printer, printing status can be monitored on the computer.
  • 1. Flash cloud account can be used to log on the Flash AD. With one Flash AD account, several printers can be operated by one operator, saving the manpower.
  • 2. Remote control & Transfer files with a simple click & Monitor the printing status.
  • 3. Free cloud storage without data loss.
  • 4. Enormous resources of models can be downloaded.
  • 5. Real-time monitoring of filaments consumption.
AD1 Parameter
Extruder number Two into one
Extruder diameter 0.6 mm
Extruder maximum set temp. 260 ℃
Print speed 10-80mm/s
Platform maximum set temp. 100 ℃ mm/s
Leveling method 8 points leveling(manual)
Support material Advertising Filament
Print volume 600*600*70 mm
Layer precision 0.2-0.4 mm
Print precision ±0.5mm
Device volume 1070*975*485 mm
Packing dimension 1170*1140*610 mm
Screen 4.5-inch touch screen
Net weight 50.2 kg
Gross weight 76 kg
Input 220V / 110V
Power 24V
Filament spool diameter 53 mm
Filament spool Diameter 53*200d*52h
Internal storage 8G
Software/communication FlashAD
Data transmission USB stick, Ethernet, Flashcloud
Software FlashPrint
Output GFZ file
Input stl, NC, cdr flie
Resume printing from power outage Support
Filament detection Support
Screen saver Support
Recoginition of printed files Support
Get A Quote
Need more information?
we will response within 24 hours

Message has been sent